Available 24/7 via chat
Available 24/7 via chat
A durometer gauge or durometer tester is needed to perform a durometer hardness test procedure. Durometer devices determine the surface hardness of many different materials, including polymers and elastomers. Each durometer or hardness tester measures the depth of an indentation in the material caused by a defined force of a given geometric presser foot. The depth of the indentation reflects the hardness of the material. A general distinction is made between static and dynamic methods. In traditional static tests, the test force is applied uniformly with increasing magnitude, while in dynamic testing methods, an instantaneous load is applied. From metal, plastic, and rubber to foam and fabric, different materials are measured using different hardness scales, such as ASTM D2240 type A and type D scales. For example, soft plastics are measured using the type A scale, while hard plastics are measured using the type D scale.
The Phase II PHT-975-20 Shore D test block kit consists of 3 color-coded Shore test blocks that range from 10 to 90HA, and Shore durometer results ...
View full detailsThe Phase II PHT-950-20 Shore A test block kit consists of 7 color-coded Shore test blocks that range from 30 to 90HA, and Shore durometer results ...
View full detailsMitutoyo 811-334-10 Model HH-334 Hardmatic Digital Durometer features a Sharp Point Indenter and has a range of 20~90 Range with 0.5 Graduation and...
View full detailsThe PCE-DDA 10 Shore A durometer is a portable handheld device used to check Shore A hardness in soft gums, elastomers, natural rubber, neoprenes, ...
View full detailsThe Mitutoyo 811-338-11 Model HH-338 Hardmatic Digital Durometer features a Sharp Point Indenter and has a range of 20~90 Range with 0.5 Graduation...
View full detailsMitutoyo 811-332-10 Model HH-332 Hardmatic Digital Durometer features a Blunt Taper Indenter and has a range of 10~90 Range with 0.5 Graduation and...
View full detailsThe PCE-DD-A Durometer is an ergonomic device that checks Shore hardness in gum, plastic and other non-metallic materials. It is of the highest qua...
View full detailsPCE-DD-D is a Shore D durometer or hardness tester used to measure the Shore hardness of materials such as hard rubber, hard resin, acrylic, glass,...
View full detailsThe Mitutoyo 811-336-10 Model HH-336 Hardmatic Digital Durometer features a Blunt Taper Indenter and has a range of 10~90 Range with 0.5 Graduation...
View full detailsThe Mitutoyo 811-337-10 Model HH-337 Hardmatic Dial Durometer features a Sharp Point Indenter and has a range of 20~90 Range with 1.0 Graduation an...
View full detailsThe Mitutoyo 811-335-10 Model HH-335 Hardmatic Dial Durometer features a Blunt Taper Indenter and has a range of 10~90 Range with 1.0 Graduation an...
View full detailsThe Mitutoyo 811-338-10 Model HH-338 Hardmatic Digital Durometer features a Sharp Point Indenter and has a range of 20~90 Range with 0.5 Graduation...
View full detailsModel No. PHT-980 Shore D DurometerShore D scale is for testing the following materials:Rubber: HardPlastics: Harder grades such as rigid thermopla...
View full detailsModel No. PHT-960 Shore A DurometerShore A scale is for testing the following materials: Rubber: Soft vulcanized (ie tyre), natural nitrile, Elas...
View full details